show policy-map interface control-plane

To display the control-plane policy maps applied to interfaces, use the show policy-map interface control-plane command.

show policy-map interface control-plane

Syntax Description

This command has no arguments or keywords.

Command Default

None

Command Modes

Any command mode

Command History

Release
Modification
5.1(3)N1(1)
This command was introduced.

Examples

This example shows how to display assigned control-plane policy maps:

switch# show policy-map interface control-plane
control Plane
 
service-policy input: copp-system-policy-default
 
class-map copp-system-class-igmp (match-any)
match protocol igmp
police cir 1024 kbps , bc 65535 bytes
conformed 0 bytes; action: transmit
violated 0 bytes; action: drop
 
class-map copp-system-class-pim-hello (match-any)
match protocol pim
police cir 1024 kbps , bc 4800000 bytes
conformed 0 bytes; action: transmit
violated 0 bytes; action: drop
 
class-map copp-system-class-bridging (match-any)
match protocol bridging
police cir 20000 kbps , bc 4800000 bytes
conformed 0 bytes; action: transmit
violated 0 bytes; action: drop
 
class-map copp-system-class-arp (match-any)
match protocol arp
<--Output truncated-->
switch(config)#
 

Related Commands

Command
Description
policy-map
Creates or modifies a policy map.
show policy-map
Displays policy maps.