show interface untagged-cos

To display the untagged class of service (CoS) values for a specified interface, use the show interface untagged-cos command.

show interface untagged-cos [ module module_no ]

Syntax Description

module
(Optional) Displays the interfaces on this module of the switch chassis.
module_no
Module number in the switch chassis. The range is from 1 to 18.

Command Default

None

Command Modes

EXEC mode

Command History

Release
Modification
4.1(3)N1(1)
This command was introduced.
5.0(3)N1(1)
Support to display Layer 3 interfaces was added.

Examples

This example shows how to display the untagged CoS values for interfaces:

switch# show interface untagged-cos
=================================
 
Interface Untagged-CoS
=================================
 
port-channel1
port-channel3 2
port-channel5 5
port-channel6
port-channel12
port-channel15
port-channel20
port-channel24
<--Output truncated-->
switch#
 

This example shows how to display the untagged CoS values for all interfaces (Layer 2, Layer 3) on a switch that runs Cisco NX-OS Release 5.0(3)N1(1):

switch# show interface untagged-cos
S3(config-if)# show int untagged-cos
=================================
 
Interface Untagged-CoS
=================================
 
port-channel100
port-channel127
port-channel128
Ethernet1/1
Ethernet1/2
Ethernet1/3
Ethernet1/4
Ethernet1/5 3
Ethernet1/6
Ethernet1/7
<--Output truncated-->
switch#
 

Related Commands

Command
Description
untagged cos
Sets a CoS value for untagged Ethernet frames.