show class-map type network-qos

To display type network-qos class maps, use the show class-map type network-qos command.

show class-map type network-qos [ class-map-name ]

Syntax Description

class-map-name
Name of the class map. The name can be a maximum of 40 alphanumeric characters.

Command Default

Displays all type network-qos class maps if no class map name is specified.

Command Modes

Any command mode

Command History

Release
Modification
4.1(3)N1(1)
This command was introduced.

Usage Guidelines

If you do not specify the type, the command displays all the class maps configured in the system.

Examples

This example shows how to display all type network-qos class maps:

switch(config)# show class-map type network-qos
 
 
Type network-qos class-maps
==============================
 
class-map type network-qos s1
match qos-group 2
 
class-map type network-qos s2
match qos-group 3
 
class-map type network-qos s3
match qos-group 4
 
class-map type network-qos s4
match qos-group 5
 
class-map type network-qos cu1
match qos-group 2
<--Output truncated-->
switch(config)#
 

Related Commands

Command
Description
class-map
Creates or modifies a class map.