show class-map type control-plane

To display control plane class map information, use the show class-map type control-plane command.

show class-map type control-plane [ class-map-name ]

Syntax Description

class-map-name
(Optional) Name of the control plane class map. The name is alphanumeric and case sensitive. The maximum length is 64 characters.

Command Default

None

Command Modes

Any command mode

Command History

Release
Modification
5.1(3)N1(1)
This command was introduced.

Usage Guidelines

This command does not require a license.

Examples

This example shows how to display control plane class map information:

switch# show class-map type control-plane
 
class-map type control-plane match-any copp-system-class-arp
match protocol arp
 
class-map type control-plane match-any copp-system-class-bgp
match protocol bgp
 
class-map type control-plane match-any copp-system-class-bridging
match protocol bridging
 
class-map type control-plane match-any copp-system-class-cdp
match protocol cdp
 
class-map type control-plane match-any copp-system-class-default
match protocol default
 
<--Output truncated-->
switch#
 

Related Commands

Command
Description
class-map type control-plane
Creates or configures a control plane class map.