control-plane

To enter control-plane configuration mode, which allows users to associate attributes that are associated with the control plane of the device, use the control-plane command.

control-plane

Syntax Description

This command has no arguments or keywords.

Command Default

None

Command Modes

Global configuration mode

Command History

Release
Modification
5.1(3)N1(1)
This command was introduced.

Usage Guidelines

After you use the control-plane command, you can associate a service policy to police all traffic that is destined to the control plane.

Examples

This example shows how to enter the control plane configuration mode:

switch# configure terminal
switch(config)# control-plane
switch(config-cp)#
 

Related Commands

Command
Description
service-policy (control-plane)
Attaches a policy map to a control plane for aggregate control plane services.
show policy-map type control-plane
Displays the configuration of a class or all classes for the policy map of a control plane.