show ip pim policy statistics register-policy

To display information about the register policy statistics for IPv4 Protocol Independent Multicast (PIM), use the show ip pim policy statistics register-policy command.

show ip pim policy statistics register-policy [ vrf { vrf-name | all | default | management }]

Syntax Description

vrf
(Optional) Applies to a virtual routing and forwarding (VRF) instance.
vrf-name
VRF name. The name can be a maximum of 32 alphanumeric characters and is case sensitive.
all
Specifies all VRFs.
default
Specifies the default VRF.
management
Specifies the management VRF.

Command Default

None

Command Modes

Any command mode

Command History

Release
Modification
5.0(3)N1(1)
This command was introduced.

Usage Guidelines

This command requires the LAN Base Services license.

Examples

This example shows how to display information about PIM policy statistics:

switch(config)# show ip pim policy statistics register-policy vrf all