show ip pim policy statistics auto-rp

To display information about the Auto-RP policy statistics for IPv4 Protocol Independent Multicast (PIM), use the show ip pim policy statistics auto-rp command.

show ip pim policy statistics auto-rp { rp-candidate-policy | mapping-agent-policy } [ vrf { vrf-name | all | default | management }]

Syntax Description

rp-candidate-
policy
Specifies candidate-RP messages.
mapping-
agent-policy
Specifies mapping agent messages.
vrf
(Optional) Applies to a virtual routing and forwarding (VRF) instance.
vrf-name
VRF name. The name can be a maximum of 32 alphanumeric characters and is case sensitive.
all
Specifies that all VRF entries be cleared from the IPv4 multicast routing table.
default
Specifies that the default VRF entry be cleared from the IPv4 multicast routing table.
management
Specifies that the management VRF entry be cleared from the IPv4 multicast routing table.

Command Default

None

Command Modes

Any command mode

Command History

Release
Modification
5.0(3)N1(1)
This command was introduced.

Usage Guidelines

This command requires the LAN Base Services license.

Examples

This example shows how to display information about IPv4 PIM policy statistics:

switch(config)# show ip pim policy statistics auto-rp rp-candidate-policy