ip pim event-history

To configure the size of the IPv4 Protocol Independent Multicast (PIM) event history buffers, use the ip pim event-history command. To revert to the default buffer size, use the no form of this command.

ip pim event-history { assert-receive | cli | hello | join-prune | null-register | packet | pim-internal | rp | vrf } size buffer-size

no ip pim event-history { assert-receive | cli | hello | join-prune | null-register | packet | pim-internal | rp | vrf } size buffer-size

Syntax Description

assert-receive
Configures the assert receive event history buffer.
cli
Configures the CLI event history buffer.
hello
Configures the hello event history buffer.
join-prune
Configures the join-prune event history buffer.
null-register
Configures the null register event history buffer.
packet
Configures the packet event history buffer.
pim-internal
Configures the PIM internal event history buffer.
rp
Configures the rendezvous point (RP) event history buffer.
vrf
Configures the virtual routing and forwarding (VRF) event history buffer.
size
Specifies the size of the buffer to allocate.
buffer-size
Buffer size is one of the following values: disabled , large , medium , or small . The default buffer size is small .

Command Default

All history buffers are allocated as small.

Command Modes

Any command mode

Command History

Release
Modification
5.0(3)N1(1)
This command was introduced.

Usage Guidelines

This command requires the LAN Base Services license.

Examples

This example shows how to configure the size of the PIM hello event history buffer:

switch(config)# ip pim event-history hello size medium
switch(config)#
 

Related Commands

Command
Description
clear ip pim event-history
Clears information in the IPv4 PIM event history buffers.
show ip pim event-history
Displays information in the IPv4 PIM event history buffers.
show running-config pim
Displays information about the running-system PIM configuration.