ip pim bsr rp-candidate-policy

To filter IPv4 Protocol Independent Multicast (PIM) bootstrap router (BSR) Candidate-RP messages that are based on a route-map policy, use the ip pim bsr rp-candidate-policy command. To disable filtering, use the no form of this command.

ip pim bsr rp-candidate-policy policy-name

no ip pim bsr rp-candidate-policy [ policy-name ]

Syntax Description

policy-name
Route-map policy name.

Command Default

Disabled

Command Modes

Global configuration mode
VRF configuration mode

Command History

Release
Modification
5.0(3)N1(1)
This command was introduced.

Usage Guidelines

You can specify the RP and group addresses, and whether the type is ASM with the match ip multicast command in a route-map policy.

This command requires the LAN Base Services license.

Examples

This example shows how to filter Candidate-RP messages:

switch(config)# ip pim bsr rp-candidate-policy my_bsr_rp_candidate_policy
 

This example shows how to disable message filtering:

switch(config)# no ip pim bsr rp-candidate-policy
 

Related Commands

Command
Description
show ip pim rp
Displays information about PIM RPs.