transmit-delay (OSPF virtual link)

To set the estimated time required to end a link-state update packet on the interface, use the transmit-delay command. To return to the default, use the no form of this command.

transmit-delay seconds

no transmit-delay

Syntax Description

seconds
Time (in seconds) required to send a link-state update. The range is from 1 to 65535 seconds. The default is 1 second.

Command Default

1 second

Command Modes

Virtual interface configuration mode

Command History

Release
Modification
5.0(3)N1(1)
This command was introduced.

Usage Guidelines

Use the transmit-delay command in virtual link configuration to account for the transmission and propagation delays for the virtual link.

This command requires the LAN Base Services license.

Examples

This example sets the retransmit delay value to 3 seconds:

switch(config)# router ospf 201
switch(config-router)# area 22 virtual-link 192.0.2.1
switch(config-router-vlink)# transmit- delay 3
switch(config-router-vlink)#

Related Commands

Command
Description
show ip ospf
Displays general information about Open Shortest Path First (OSPF) routing instances.