show ip msdp route

To display information about the Multicast Source Discovery Protocol (MSDP) Source-Active (SA) route cache, use the show ip msdp route command.

show ip msdp route [{ source [ group ]} | { group [ source ]}] [ asn ] [ peer peer ] [ detail ] [ vrf { vrf-name | all }]

Syntax Description

source
Source address for SA cache information.
group
(Optional) Group address for SA cache information.
asn
(Optional) Autonomous system (AS) number.
peer peer
(Optional) Specifies the IP address of a peer.
detail
(Optional) Displays detailed information.
vrf
(Optional) Applies to a virtual routing and forwarding (VRF) instance.
vrf-name
VRF name. The name can be a maximum of 32 alphanumeric characters and is case sensitive.
all
Specifies all VRFs.

Command Default

None

Command Modes

Any command mode

Command History

Release
Modification
5.0(3)N1(1)
This command was introduced.

Usage Guidelines

The show ip msdp route command is an alternative form of this command.

This command requires the LAN Base Services license.

Examples

This example shows how to display information about the MSDP SA cache:

switch(config)# show ip msdp sa-cache
 

Related Commands

Command
Description
clear ip msdp sa-cache
Clears routes in the MSDP Source-Active cache.
show ip msdp route
Displays information about the MSDP SA cache.