ip msdp reconnect-interval

To configure a reconnect interval for the TCP connection, use the ip msdp reconnect-interval command. To reset a reconnect interval to the default, use the no form of this command.

ip msdp reconnect-interval interval

no ip msdp reconnect-interval [ interval ]

Syntax Description

interval
Reconnect interval in seconds. The range is from 1 to 60. The default is 10.

Command Default

The reconnect interval is 10 seconds.

Command Modes

Global configuration mode

Command History

Release
Modification
5.0(3)N1(1)
This command was introduced.

Usage Guidelines

This command requires the LAN Base Services license.

Examples

This example shows how to configure a reconnect interval for the TCP connection:

switch(config)# ip msdp reconnect-interval 20
 

This example shows how to reset a reconnect interval to the default:

switch(config)# no ip msdp reconnect-interval
 

Related Commands

Command
Description
show ip msdp peer
Displays information about MSDP peers.