ip msdp keepalive

To configure a Multicast Source Discovery Protocol (MSDP) peer keepalive interval and timeout, use the ip msdp keepalive command. To reset the timeout and interval to the default, use the no form of this command.

ip msdp keepalive peer-address interval timeout

no ip msdp keepalive peer-address [ interval timeout ]

Syntax Description

peer-address
IP address of an MSDP peer.
interval
Keepalive interval in seconds. The range is from 1 to 60. The default is 60.
timeout
Keepalive timeout in seconds. The range is from 1 to 90. The default is 90.

Command Default

The keepalive interval is 60 seconds.
The keepalive timeout is 90 seconds.

Command Modes

Global configuration mode

Command History

Release
Modification
5.0(3)N1(1)
This command was introduced.

Usage Guidelines

This command requires the LAN Base Services license.

Examples

This example shows how to configure an MSDP peer keepalive interval and timeout:

switch(config)# ip msdp keepalive 192.168.1.10 60 80
 

This example shows how to reset a keepalive interval and timeout to the default:

switch(config)# no ip msdp keepalive 192.168.1.10
 

Related Commands

Command
Description
show ip msdp peer
Displays information about MSDP peers.