ip msdp group-limit

To configure the Multicast Source Discovery Protocol (MSDP) maximum number of (S, G) entries that the software creates for the specified prefix, use the ip msdp group-limit command. To remove the group limit, use the no form of this command.

ip msdp group-limit limit source prefix

no ip msdp group-limit limit source prefix

Syntax Description

limit
Limit on number of groups. The range is from 0 to 4294967295. The default is no limit.
source prefix
Specifies the prefix to match sources against.

Command Default

None

Command Modes

Global configuration mode

Command History

Release
Modification
5.0(3)N1(1)
This command was introduced.

Usage Guidelines

This command requires the LAN Base Services license.

Examples

This example shows how to configure the maximum number of (S, G) entries to create for a source:

switch(config)# ip msdp group-limit 4000 source 192.168.1.0/24
 

This example shows how to remove the limit entries to create:

switch(config)# no ip msdp group-limit 4000 source 192.168.1.0/24
 

Related Commands

Command
Description
show ip msdp sources
Displays information about the MSDP learned sources and group limit.