show vlan dot1Q tag native

To display the status of tagging on the native VLANs, use the show vlan dot1Q tag native command.

show vlan dot1Q tag native

Syntax Description

This command has no arguments or keywords.

Command Default

None

Command Modes

EXEC mode

Command History

Release
Modification
4.0(0)N1(1a)
This command was introduced.

Examples

This example shows how to display the status of 802.1Q tagging on the native VLANs:

switch# show vlan dot1Q tag native
vlan dot1q native tag is enabled
switch#
 

Related Commands

Command
Description
vlan dot1q tag native
Enables dot1q (IEEE 802.1Q) tagging for all native VLANs on all trunked ports on the switch.