show startup-config vtp

To display the VLAN Trunking Protocol (VTP) configuration from the startup configuration file, use the show startup-config vtp command.

show startup-config vtp

Syntax Description

This command has no arguments or keywords.

Command Default

None

Command Modes

EXEC mode

Command History

Release
Modification
4.2(1)N1(1)
This command was introduced.

Examples

This example shows how to display the VTP configuration stored in the startup configuration file:

switch# show startup-config vtp
 
!Command: show startup-config vtp
!Time: Tue Sep 7 08:45:33 2010
!Startup config saved at: Tue Sep 7 08:45:03 2010
 
version 5.0(2)N1(1)
feature vtp
 
vtp mode transparent
vtp domain MyDomain
vtp file bootflash:/myvtp.txt
 
 
switch#
 

Related Commands

Command
Description
copy running-config startup-config
Copies the running configuration to the startup configuration file.
feature vtp
Enables VTP on the switch.
vtp domain
Configures the VTP administrative domain.
vtp file
Stores the VTP configuration in a file.
vtp mode
Configures a VTP device mode.