show startup-config flexlink

To display the startup configuration for Flex Links, use the show startup-config flexlink command.

show startup-config flexlink [ all ]

Syntax Description

all
(Optional) Displays information about Flex Links including default settings.

Command Default

None

Command Modes

EXEC mode

Command History

Release
Modification
5.0(3)N2(1)
This command was introduced.

Examples

This example shows how to display the startup configuration for Flex Links:

switch# show startup-config flexlink
 

This example shows how to display the detailed startup configuration for Flex Links:

switch# show startup-config flexlink all
 

Related Commands

Command
Description
copy running-config startup-config
Copies the running configuration information to the startup configuration file.
show running-config backup
Displays the running configuration information for backup interfaces.
show running-config flexlink
Displays Flex Links running configuration information.
show tech-support backup
Displays troubleshooting information for backup interfaces.
show tech-support flexlink
Displays troubleshooting information for Flex Links.