show port-channel summary

To display summary information about EtherChannels, use the show port-channel summary command.

show port-channel summary

Syntax Description

This command has no arguments or keywords.

Command Default

None

Command Modes

Global configuration mode
EXEC mode

Command History

Release
Modification
4.0(0)N1(1a)
This command was introduced.

Usage Guidelines

Before you use this command, you must configure an EtherChannel group using the interface port-channel command.

Examples

This example shows how to display summary information about EtherChannels:

switch# show port-channel summary
Flags: D - Down P - Up in port-channel (members)
I - Individual H - Hot-standby (LACP only)
s - Suspended r - Module-removed
S - Switched R - Routed
U - Up (port-channel)
--------------------------------------------------------------------------------
Group Port- Type Protocol Member Ports
Channel
--------------------------------------------------------------------------------
1 Po1(SU) Eth LACP Eth1/1(P) Eth1/2(P) Eth1/3(P)
Eth1/4(P) Eth1/21(P) Eth1/22(P)
Eth1/23(P) Eth1/24(P) Eth1/25(P)
Eth1/26(P) Eth1/27(P) Eth1/28(P)
Eth1/29(P) Eth1/30(P) Eth1/31(P)
Eth1/32(P)
3 Po3(SU) Eth NONE Eth1/9(P) Eth1/10(P) Eth1/13(P)
Eth1/14(P) Eth1/40(P)
5 Po5(SU) Eth NONE Eth3/5(P) Eth3/6(P)
6 Po6(SU) Eth NONE Eth1/5(P) Eth1/6(P) Eth1/7(P)
Eth1/8(P)
12 Po12(SU) Eth NONE Eth3/3(P) Eth3/4(P)
15 Po15(SD) Eth NONE --
20 Po20(SU) Eth NONE Eth1/17(P) Eth1/18(P) Eth1/19(D)
Eth1/20(P)
24 Po24(SU) Eth LACP Eth105/1/27(P) Eth105/1/28(P) Eth105/1/29
(P)
Eth105/1/30(P) Eth105/1/31(P) Eth105/1/32
(P)
25 Po25(SU) Eth LACP Eth105/1/23(P) Eth105/1/24(P) Eth105/1/25
(P)
Eth105/1/26(P)
33 Po33(SD) Eth NONE --
41 Po41(SD) Eth NONE --
<---output truncated--->
switch#
 

Related Commands

Command
Description
channel-group (Ethernet)
Assigns and configures a physical interface to an EtherChannel.
interface port-channel
Creates an EtherChannel interface and enters interface configuration mode.