feature flexlink

To enable Flex Links, use the feature flexlink command. To disable Flex Links, use the no form of this command.

feature flexlink

no feature flexlink

Syntax Description

This command has no arguments or keywords.

Command Default

Disabled

Command Modes

Global configuration mode

Command History

Release
Modification
5.0(3)N2(1)
This command was introduced.

Examples

This example shows how to enable Flex Links on the switch:

switch(config)# feature flexlink
 

Related Commands

Command
Description
show feature
Displays the status of features enabled or disabled on the switch.
switchport backup interface
Configures Flex Links, which are two interfaces that provide backup to each other, on a Layer 2 interface.