show ip igmp snooping mrouter

To display the multicast routers detected by IGMP snooping, use the show ip igmp snooping mrouter command.

show ip igmp snooping mrouter [ vlan vlan-id ]

Syntax Description

vlan vlan-id
(Optional) Specifies a VLAN. The range is from 1 to 3967 and 4048 to 4093.

Command Default

None

Command Modes

Any command mode

Command History

Release
Modification
5.0(3)N1(1)
This command was introduced.

Usage Guidelines

This command does not require a license.

Examples

This example shows how to display the multicast routers detected by IGMP snooping:

switch(config)# show ip igmp snooping mrouter
Type: S - Static, D - Dynamic, V - vPC Peer Link
Type: S - Static, D - Dynamic, V - vPC Peer Link, I - Internal
Vlan Router-port Type Uptime Expires
20 Vlan20 I 04:16:16 never (down)
 
switch(config)#