ip igmp state-limit

To configure the maximum states allowed, use the ip igmp state-limit command. To remove the state limit, use the no form of this command.

ip igmp state-limit max-states [ reserved reserve-policy max-reserved ]

no ip igmp state-limit [ max-states [ reserved reserve-policy max-reserved ]]

Syntax Description

max-states
Maximum states allowed. The range is from 1 to 4,294,967,295.
reserved reserve-policy max-reserved
(Optional) Specifies to use the route-map policy name for the reserve policy. The route map name can be a maximum of 100 alphanumeric characters.
max-reserved
(Optional) Maximum number of (*, G) and (S, G) entries allowed on the interface.

Command Default

None

Command Modes

Interface configuration mode

Command History

Release
Modification
5.0(3)N1(1)
This command was introduced.

Usage Guidelines

This command does not require a license.

Examples

This example shows how to configure a state limit:

switch(config)# interface ethernet 2/2
switch(config-if)# ip igmp state-limit 5000
switch(config-if)#
 

This example shows how to remove a state limit:

switch(config)# interface ethernet 2/2
switch(config-if)# no ip igmp state-limit
switch(config-if)#

Related Commands

Command
Description
show ip igmp interface
Displays IGMP information about the interface.