ip igmp group-timeout

To configure a group membership timeout for IGMPv2, use the ip igmp group-timeout command. To return to the default timeout, use the no form of this command.

ip igmp group-timeout timeout

no ip igmp group-timeout [ timeout ]

Syntax Description

timeout
Timeout in seconds. The range is from 3 to 65,535. The default is 260.

Command Default

The group membership timeout is 260 seconds.

Command Modes

Interface configuration mode

Command History

Release
Modification
5.0(3)N1(1)
This command was introduced.

Usage Guidelines

This command does not require a license.

Examples

This example shows how to configure a group membership timeout:

switch(config)# interface ethernet 2/2
switch(config-if)# ip igmp group-timeout 200
switch(config-if)#
 

This example shows how to reset a group membership timeout to the default:

switch(config)# interface ethernet 2/2
switch(config-if)# no ip igmp group-timeout
switch(config-if)#
 

Related Commands

Command
Description
show ip igmp interface
Displays IGMP information about the interface.