setup

To enter the basic device setup dialog, use the setup command.

setup [ ficon ]

Syntax Description

ficon
(Optional) Runs the basic ficon setup command facility.

Command Default

None

Command Modes

EXEC mode

Command History

Release
Modification
4.0(0)N1(1a)
This command was introduced.

Usage Guidelines

The setup script uses the factory-default values, not the values that you have configured. You can exit the dialog at any point by pressing Ctrl-C .

Examples

This example shows how to enter the basic device setup script:

switch# setup
 

Related Commands

Command
Description
show running-config
Displays the running configuration.