modem init-string

To download the initialization string to a modem connected to the console port, use the modem init-string command. To revert to the default, use the no form of this command.

modem init-string { default | user-input }

no modem init-string

Syntax Description

default
Downloads the default initialization string.
user-input
Downloads the user-input initialization string.

Command Default

The default initialization string is ATE0Q1&D2&C1S0=1\015.

Command Modes

Terminal line configuration mode

Command History

Release
Modification
4.0(0)N1(1a)
This command was introduced.

Usage Guidelines

You can configure the console port only from a session on the console port.

The default initialization string ATE0Q1&D2&C1S0=1\015 is defined as follows:

Use the modem set-string command to configure the user-input initialization string.

Examples

This example shows how to download the default initialization string to the modem connected to the console port:

switch# configure terminal
switch(config)# line console
switch(config-console)# modem init-string default
 

This example shows how to download the user-input initialization string to the modem connected to the console port:

switch# configure terminal
switch(config)# line console
switch(config-console)# modem init-string user-input
 

This example shows how to remove the initialization string to the modem connected to the console port:

switch# configure terminal
switch(config)# line console
switch(config-console)# no modem init-string
 

Related Commands

Command
Description
line console
Enters console port configuration mode.
modem set-string
Configures the user-input initialization string for a modem.
show line
Displays information about the console port configuration.