topology

To configure a Layer 2 topology for FabricPath Intermediate System-to-Intermediate System (ISIS), use the topology command. To return to the default setting, use the no form of this command.

topology topology-number

no topology [ topology-number ]

Syntax Description

topology-number
Topology number. The range is form 1 to 63.

Command Default

None

Command Modes

FabricPath IS-IS configuration mode

Command History

Release
Modification
5.1(3)N1(1)
This command was introduced.

Usage Guidelines

This command requires an Enhanced Layer 2 license.

Examples

This example shows how to configure a FabricPath IS-IS topology:

switch# configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
switch(config)# fabricpath domain default
switch(config-fabricpath-isis)# topology 70
switch(config-fabricpath-isis)#

Related Commands

Command
Description
fabricpath domain default
Enables FabricPath Layer 2 IS-IS.