show fabricpath system-id

To display information about the FabricPath network by the system ID, use the show fabricpath system-id command.

show fabricpath system-id { mac-address }

Syntax Description

mac-address
MAC address.

Command Default

None

Command Modes

Any command mode

Command History

Release
Modification
5.1(3)N1(1)
This command was introduced.

Usage Guidelines

This command requires an Enhanced Layer 2 license.

Examples

This example shows how to display information about the FabricPath network by the system ID:

switch# show fabricpath system-id 0005.73a3.ba3c
Switch-Id: 2590
State: Confirmed
switch#
 

Related Commands

Command
Description
show running-config fabricpath
Displays information about the current FabricPath configuration.