show fabricpath route

To display FabricPath route information, use the show fabricpath route command.

show fabricpath route [ detail [ hex ] | hex | topology {topology_ID [ switchid switch-ID ] | all} [ detail | hex ]]

Syntax Description

detail
(Optional) Displays detailed information.
hex
(Optional) Displays the switch IDs in hexadecimal.
topology topology_ID
(Optional) Displays the topology information. The topology value is from 0 to 63.
switchid
(Optional) Displays the switch ID.
switch-ID
Switch ID value. The range is from 0 to 16383.

Command Default

None

Command Modes

Any command mode

Command History

Release
Modification
5.1(3)N1(1)
This command was introduced.

Usage Guidelines

This command requires an Enhanced Layer 2 license.

Examples

This example shows how to display the detailed information about the FabricPath route:

switch# show fabricpath route detail
FabricPath Unicast Route Table
'a/b/c' denotes ftag/switch-id/subswitch-id
'[x/y]' denotes [admin distance/metric]
ftag 0 is local ftag
subswitch-id 0 is default subswitch-id
 
 
FabricPath Unicast Route Table for Topology-Default
 
0/2590/0, number of next-hops: 0
via ---- , [60/0], 0 day/s 02:57:18, local
switch#
 

This example shows how to display the information about the FabricPath route:

switch# show fabricpath route
FabricPath Unicast Route Table
'a/b/c' denotes ftag/switch-id/subswitch-id
'[x/y]' denotes [admin distance/metric]
ftag 0 is local ftag
subswitch-id 0 is default subswitch-id
 
 
FabricPath Unicast Route Table for Topology-Default
 
0/2590/0, number of next-hops: 0
via ---- , [60/0], 0 day/s 02:58:05, local
switch#
 

Related Commands

Command
Description
show running-config fabricpath
Displays the current FabricPath configuration.