show fabricpath load-balance unicast

To display FabricPath load-balancing information for the unicast load-balancing scheme, use the show fabricpath load-balance unicast command.

show fabricpath load-balance unicast forwarding-path ftag ftag-ID switchid switch-ID src-mac MAC-addr dst-mac MAC-addr [ dst-ip ip-addr ] [ dst-ipv6 ipv6-addr ] [ l4-dst-port l4-dest-port ] [ l4-src-port l4-src-port ] [ src-ip ip-addr ] [ src-ipv6 ipv6-addr ] [ vlan vlan-ID ]

Syntax Description

forwarding-path
Identifies the FabricPath that forwards the packet.
ftag ftag-ID
Displays the load-balancing parameters for the FabricPath FTAG. The FTAG value is from 0 to 4,294,967,295.
switchid switch-ID
Displays the load-balancing parameters for a specific FabricPath switch ID. The switch ID is from 0 to 4,294,967,295.
src-mac
Displays the load-balancing parameters for the source MAC address.
MAC-addr
MAC address. The format is EE:EE:EE:EE:EE:EE.
dst-mac
Displays the load-balancing parameters for the destination MAC address.
dst-ip
(Optional) Displays the load-balancing parameters for the destination IPv4 address.
ip-addr
IPv4 address. The format is A.B.C.D.
dst-ipv6
(Optional) Displays the load-balancing destination hash parameters.
ipv6-addr
IPv6 address. The format is EE:EE::EE:EE.
l4-dst-port l4-dest-port
(Optional) Displays the destination TCP or UDP port information used in hashing. The port number is from 0 to 65535.
l4-src-port l4-src-port
(Optional) Displays the source TCP or UDP port information used in hashing. The port number is from 0 to 65535.
src-ip
(Optional) Displays the load-balancing parameters for the source IPv4 address.
src-ipv6
(Optional) Displays the load-balancing source hash parameters.
vlan vlan-ID
(Optional) Displays the load-balancing information for FabricPath VLANs. The range is from 1 to 4094.

Command Default

None

Command Modes

Any command mode

Command History

Release
Modification
5.1(3)N1(1)
This command was introduced.

Usage Guidelines

This command requires an Enhanced Layer 2 license.

Examples

This example shows how to display FabricPath load-balancing forwarding information for the unicast load-balancing scheme:

switch# show fabricpath load-balance unicast forwarding-path ftag 1 switchid 200 src-mac 00:10:20:30:40:50 dst-mac 00:30:40:50:60:70 vlan 200
 

This example shows how to display FabricPath load-balance hashing information for the unicast load-balancing scheme:

switch# show fabricpath load-balance unicast forwarding-path ftag 1 switchid 232 src-mac 0000.1234.5678 dst-mac 0000.3452.4567 src-ipv6 12:34::56:78 dst-ipv6 01:34::56:78 l4-dst-port 100 l4-src-port 435 vlan 200
Missing params will be substituted by 0's.
 
crc8_hash: 229
This flow selects interface Po400
switch#
 

Related Commands

Command
Description
fabricpath load-balance
Displays FabricPath load-balancing parameters.