show fabricpath load-balance multicast

To display FabricPath load-balancing information for the multicast load-balancing scheme, use the show fabricpath load-balance multicast command.

show fabricpath load-balance multicast ftag-selected vlan vlan-ID macg MAC-addr

Syntax Description

ftag-selected
Displays the multicast load-balancing parameters for the FabricPath FTAG.
vlan vlan-ID
Displays load-balancing for FabricPath VLANs. The range is from 1 to 4094.
macg MAC-addr
Displays the load-balancing parameters for the multicast group MAC address. The format is EEEE.EEEE.EEEE.

Command Default

None

Command Modes

Any command mode

Command History

Release
Modification
5.1(3)N1(1)
This command was introduced.

Usage Guidelines

This command requires an Enhanced Layer 2 license.

Examples

This example shows how to display FabricPath load-balancing forwarding information for the multicast load-balancing scheme:

switch# show fabricpath load-balance multicast ftag-selected vlan 10 macg 0100.5E10.1010
 

Related Commands

Command
Description
fabricpath load-balance
Displays FabricPath load-balancing parameters.