show fabricpath isis trees

To display information about the FabricPath Intermediate System-to-Intermediate System (IS-IS) trees, use the show fabricpath isis trees command.

show fabricpath isis trees [ multidestination tree-id ]

Syntax Description

multidestination
(Optional) Displays the multidestination information.
tree-id
Tree identifier. The range is from 1 to 2.

Command Default

None

Command Modes

Any command mode

Command History

Release
Modification
5.1(3)N1(1)
This command was introduced.

Usage Guidelines

This command requires an Enhanced Layer 2 license.

Examples

This example shows how to display information about the FabricPath IS-IS tree multidestination:

switch# show fabricpath isis trees multidestination 1
Fabricpath IS-IS domain: default
Note: The metric mentioned for multidestination tree is from the root of that tr
ee to that switch-id
 
MT-0
Topology 0, Tree 1, Swid routing table
 
switch#
 

Related Commands

Command
Description
fabricpath domain default
Enables FabricPath Layer 2 IS-IS.