show fabricpath isis traffic

To display information about the FabricPath Intermediate System-to-Intermediate System (IS-IS) traffic, use the show fabricpath isis traffic command.

show fabricpath isis traffic { ethernet slot / port | port-channel channel-number }

Syntax Description

ethernet
Displays the Ethernet interface.
slot / port
Slot or chassis number and the port number. The slot number is from 1 to 255 and the port number is from 1 to 128.
port-channel
Displays the port-channel interface.
channel-number
Port-channel number. The range is from 1 to 4096.

Command Default

None

Command Modes

Global configuraion mode

Command History

Release
Modification
5.1(3)N1(1)
This command was introduced.

Usage Guidelines

This command requires an Enhanced Layer 2 license.

Examples

This example shows how to display information about the FabricPath IS-IS traffic:

switch1# show fabricpath isis traffic
Fabricpath IS-IS domain: default
Fabricpath IS-IS Traffic:
PDU Received Sent RcvAuthErr OtherRcvErr ReTransmit
P2P-IIH 0 0 0 0 n/a
CSNP 0 0 0 0 n/a
PSNP 0 0 0 0 n/a
LSP 0 0 0 0 0
 
switch#

Related Commands

Command
Description
fabricpath domain default
Enables FabricPath Layer 2 IS-IS.