show fabricpath isis switch-id

To display switch IDs and reachability information in the topology, use the show fabricpath isis switch-id command.

show fabricpath isis switch-id

Syntax Description

This command has no arguments or keywords.

Command Default

None

Command Modes

Global configuration mode

Command History

Release
Modification
5.1(3)N1(1)
This command was introduced.

Usage Guidelines

This command requires an Enhanced Layer 2 license.

Examples

This example shows how to display the switch ID database:

switch# show fabricpath isis switch-id
 
Fabricpath IS-IS domain: default
Fabricpath IS-IS Switch-ID Database
Legend: C - Confirmed, T - tentative, W - swap
S - sticky, E - Emulated Switch
'*' - this system
System-ID Primary Secondary Reachable Bcast-Priority
MT-0
0005.73a3.ba3c* 2590[C] 0[C] Yes 64
switch#

Related Commands

Command
Description
fabricpath domain default
Enables FabricPath Layer 2 IS-IS.