log-adjacency-changes (FabricPath)

To configure the log changes in the adjacency state, use the log-adjacency-changes command. To return to the default setting, use the no form of this command.

log-adjacency-changes

no log-adjacency-changes

Syntax Description

This command has no arguments or keywords.

Command Default

ON

Command Modes

FabricPath IS-IS configuration mode

Command History

Release
Modification
5.1(3)N1(1)
This command was introduced.

Usage Guidelines

This command requires an Enhanced Layer 2 license.

Examples

This example shows how to configure the log changes in the adjacency state:

switch# configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
switch(config)# fabricpath domain default
switch(config-fabricpath-isis)# log-adjacency-changes
switch(config-fabricpath-isis)#

Related Commands

Command
Description
show fabricpath isis
Displays FabricPath IS-IS information.