show sprom fex

To display information about the SPROM, use the show sprom fex command.

show sprom fex { all | chassis_ID { all | backplane | powersupply module_no }}

Syntax Description

chassis_ID
Fabric Extender chassis ID. The chassis ID range is from 100 to 199.
all
Displays all SPROM content for a specific Fabric Extender.
backplane
Displays the backplane SPROM content for a specific Fabric Extender.
powersupply
Displays the power supply SPROM content for a specific Fabric Extender.
module_no
Power supply module number for a specific Fabric Extender. The range is from 1 to 2.

Command Default

None

Command Modes

EXEC mode

Command History

Release
Modification
4.2(1)N1(1)
This command was introduced.

Examples

This example shows how to display all SPROM content for a specific Fabric Extender:

switch# show sprom fex 100 all
DISPLAY FEX 100 SUP sprom contents
Common block:
Block Signature : 0xabab
Block Version : 3
Block Length : 160
Block Checksum : 0x18c9
EEPROM Size : 65535
Block Count : 3
FRU Major Type : 0x6003
FRU Minor Type : 0x0
OEM String : Cisco Systems, Inc.
Product Number : N5K-C5110T-BF-1GE
Serial Number : JAF1237ABSE
Part Number : 73-12009-02
Part Revision : 00
Mfg Deviation : 0
H/W Version : 0.0
Mfg Bits : 0
Engineer Use : 0
snmpOID : 9.12.3.1.9.72.5.0
Power Consump : -200
RMA Code : 0-0-0-0
CLEI Code : 00000000000
VID : V00
Supervisor Module specific block:
Block Signature : 0x6002
Block Version : 2
Block Length : 103
Block Checksum : 0x2648
Feature Bits : 0x0
HW Changes Bits : 0x2
Card Index : 11011
MAC Addresses : 00-00-00-00-00-00
Number of MACs : 0
Number of EPLD : 0
Port Type-Num : 2-52
Sensor #1 : 85,75
Sensor #2 : 100,90
Sensor #3 : 100,90
Sensor #4 : 100,90
Sensor #5 : 100,90
Sensor #6 : 100,90
Sensor #7 : 100,90
Sensor #8 : 100,90
Max Connector Power: 1000
Cooling Requirement: 300
Ambient Temperature: 40
 
DISPLAY FEX 100 backplane sprom contents:
Common block:
Block Signature : 0xabab
Block Version : 3
Block Length : 160
Block Checksum : 0x195d
EEPROM Size : 65535
<--Output truncated-->
switch#
 

This command shows how to display the power supply SPROM contents for a specific Fabric Extender:

switch# show sprom fex 100 powersupply 1
DISPLAY FEX 100 power-supply 1 sprom contents:
Common block:
Block Signature : 0xabab
Block Version : 3
Block Length : 124
Block Checksum : 0x15fc
EEPROM Size : 124
Block Count : 1
FRU Major Type : 0xab01
FRU Minor Type : 0x1
OEM String : Cisco Systems, Inc.
Product Number : N5K-PAC-200W
Serial Number : PAC12473L17
Part Number : 341-0335-01
Part Revision : 01
CLEI Code : COUPADSBAA
VID : 00V0
snmpOID : 0.0.0.0.0.0.0.0
H/W Version : 0.1
Current : 1667
RMA Code : 0-0-0-0
switch#
 

Related Commands

Command
Description
show fex
Displays all configured Fabric Extender chassis connected to the switch.