zone clone

To clone a zone name, use the zone clone command.

zone clone current-zone-name new-zone-name vsan vsan-id

Syntax Description

current-zone-name new-zone-name
Zone attribute group name. The name can be a maximum of 64 characters.
vsan vsan-id
Specifies the VSAN ID. The range is from 1 to 4093.

Command Default

None

Command Modes

Global configuration mode

Command History

Release
Modification
4.0(0)N1(1a)
This command was introduced.

Usage Guidelines

Use the no form of the zone name (configuration mode) command to delete the zone name.

Examples

This example shows how to create a clone of the original zone group called origZone into the clone zone group cloneZone on VSAN 45:

switch(config)# zone clone origZone cloneZone vsan 45
 

Related Commands

Command
Description
show zone
Displays zone information.