system default zone distribute full

To configure default values for distribution to a zone set, use the system default zone distribute full command. To revert to the defaults, use the no form of this command.

system default zone distribute full

no system default zone distribute full

Syntax Description

This command has no arguments or keywords.

Command Default

Distribution to active zone sets only.

Command Modes

Global configuration mode

Command History

Release
Modification
4.0(0)N1(1a)
This command was introduced.

Usage Guidelines

This command distributes the default values for the default zone to all Virtual SANs (VSANs). The default values are used when you initially create a VSAN and it becomes active. If you do not want to use the default values, use the zoneset distribute full vsan command to distribute the operational values for the default zone.

The system default zone distribute full command should only be used with VSANs that have not yet been created; it has no effect on existing VSANs.

Because VSAN 1 is the default VSAN and is always present, this command has no effect on it.

Examples

This example shows how to distribute the default values to the full zone set:

switch(config)# system default zone distribute full
 

This example shows how to distribute the default values to the active zone set only:

switch(config)# no system default zone distribute full
 

Related Commands

Command
Description
zoneset distribute full vsan
Distributes the operational values for the default zone to all zone sets.
show system default zone
Displays default values for the default zone.