show loadbalancing

To display load balancing status for specific unicast flows, use the show loadbalancing command.

show loadbalancing vsan vsan-id source-fcid dest-fcid [ exchange-id ]

Syntax Description

vsan vsan-id
Displays Fabric login (FLOGI) database entries based on the FCID allocated. The format is 0xhhhhhh.
source-fcid
Displays the load balancing status for the specified source FCID. The format is 0xhhhhhh.
dest-fcid
Displays the load balancing status for the specified destination FCID. The format is 0xhhhhhh.
exchange-id
(Optional) Displays the load balancing status for the specified exchange. The format is 0xhhhhhh.

Command Default

None

Command Modes

EXEC mode

Command History

Release
Modification
4.0(0)N1(1a)
This command was introduced.

Examples

This example shows how to display the load-balancing information for the specified source and destination in VSAN 3:

switch# show loadbalancing vsan 3 0x3345 0x2546
 

Related Commands

Command
Description
vsan
Configures VSAN information or membership.