member (fcalias configuration mode)

To add a member name to a Fibre Channel alias on a Virtual SAN (VSAN), use the member command. To remove a member name from a Fibre Channel alias, use the no form of this command.

member { device-alias aliasname | domain-id domain-id port-number port-number | fcid fc-id | fwwn fwwn-id | interface fc slot / port [ domain-id domain-id | swwn swwn-id ] | pwwn pwwn-id | symbolic-nodename nodename }

no member { device-alias aliasname | domain-id domain-id port-number port-number | fcid fc-id | fwwn fwwn-id | interface fc slot / port [ domain-id domain-id | swwn swwn-id ] | pwwn pwwn-id | symbolic-nodename nodename }

Syntax Description

device-alias aliasname
Specifies the member device alias. The name can be a maximum of 64 characters.
domain-id domain-id
Specifies the member domain ID. The range is from 1 to 239.
port-number port-number
Specifies a port number in the range of 0 to 255.
fcid fc-id
Specifies the member FC ID. The format is 0 x hhhhhh, where h is a hexadecimal digit.
fwwn fwwn-id
Specifies the member fWWN ID. The format is hh : hh : hh : hh : hh : hh : hh : hh, where h is a hexadecimal digit.
interface fc slot / port
Specifies the member interface ID and its slot number and port number.
swwn swwn-id
(Optional) Specifies the member sWWN ID. The format is hh : hh : hh : hh : hh : hh : hh : hh, where h is a hexadecimal digit.
pwwn pwwn-id
Specifies the member pWWN ID. The format is hh : hh : hh : hh : hh : hh : hh : hh, where h is a hexadecimal digit.
symbolic-nodename nodename
Specifies the member symbolic node name. The maximum length is 255 characters.

Command Default

None

Command Modes

Fcalias configuration mode

Command History

Release
Modification
4.0(0)N1(1a)
This command was introduced.

Examples

This example shows how to add a member to an alias called samplealias:

switch(config)# fcalias name samplealias
 

This example shows how to define a Fibre Channel interface for the member:

switch(config-fcalias)# member interface fc3/1
 

This example shows how to delete the specified member:

switch(config-fcalias)# no member interface fc3/1
 

Related Commands

Command
Description
fcalias name
Configures an alias.
show fcalias
Displays the member name information in an alias.