feature fcsp

To enable the Fibre Channel Security Protocol (FC-SP) in a switch, use the feature fcsp command. To disable FC-SP, use the no form of this command.

feature fcsp

no feature fcsp

Syntax Description

This command has no arguments or keywords.

Command Default

Disabled

Command Modes

Global configuration mode

Command History

Release
Modification
4.0(0)N1(1a)
This command was introduced.
4.2(1)N1(1)
The feature fcsp command has been added.


Note On a Cisco Nexus 5000 Series switch that runs a Cisco NX-OS release prior to 4.2(1)N1(1), this command was known as the fcsp enable command.


Usage Guidelines

Additional FC-SP commands are available when the FC-SP feature is enabled.

Examples

This example shows how to enable FC-SP:

switch(config)# feature fcsp
 

Related Commands

Command
Description
show fcsp
Displays configured FC-SP information.