fcns proxy-port

To register a name server proxy, use the fcns proxy-port command.

fcns proxy-port wwn-id vsan vsan-id

no fcns proxy-port wwn-id vsan vsan-id

Syntax Description

Port WWN, with the format hh : hh : hh : hh : hh : hh : hh : hh.
vsan vsan-id
Specifies a VSAN ID. The range is from 1 to 4093.

Command Default


Command Modes

Global configuration mode

Command History

This command was introduced.

Usage Guidelines

One name server can be configured to proxy another name server, and the name server information can be displayed using the CLI. The name server can be viewed using the CLI or the Cisco Fabric Manager.

All name server registration requests come from the same port whose parameter is registered or changed. If it does not, then the request is rejected.


This example shows how to configure a proxy port for VSAN 2:

switch(config)# fcns proxy-port 21:00:00:e0:8b:00:26:d vsan 2

Related Commands

show fcns
Displays the name server database and statistical information for a specified VSAN or for all VSANs.