log-neighbor-warnings

To enable the logging of Enhanced Interior Gateway Routing Protocol (EIGRP) neighbor warning messages, use the log-neighbor-warnings command. To disable the logging of EIGRP neighbor warning messages, use the no form of this command.

log-neighbor-warnings [ seconds ]

no log-neighbor-warnings [ seconds ]

Syntax Description

seconds
(Optional) Time interval (in seconds) between repeated neighbor warning messages. The range of seconds is from 1 to 65535.

Command Default

Neighbor warning messages are logged.

Command Modes

Address-family configuration mode
Router configuration mode
Router VRF configuration mode

Command History

Release
Modification
5.0(3)N1(1)
This command was introduced.

Usage Guidelines

Use the log-neighbor-warnings command to enable neighbor warning messages and to configure the interval between repeated neighbor warning messages.

This command requires the LAN Base Services license.

Examples

This example shows how to log neighbor warning messages for EIGRP process 209 and to repeat the warning messages in 5-minute (300 seconds) intervals:

switch(config)# router eigrp 209
switch(config-router)# log-neighbor-warnings 30
switch(config-router)#
 

Related Commands

Command
Description
log-adjacency-changes
Enables logging of EIGRP adjacency state changes.
show ip eigrp interfaces
Displays information about EIGRP interfaces.