show ip bgp paths

To display all the Border Gateway Protocol (BGP) paths in the database, use the show ip bgp paths command.

show ip bgp paths

Syntax Description

This command has no arguments or keywords.

Command Default

None

Command Modes

Any command mode

Command History

Release
Modification
5.0(3)N1(1)
This command was introduced.

Usage Guidelines

This command requires the LAN Enterprise Services license.

Examples

This example shows how to display the BGP paths in the database:

switch(config)# show ip bgp paths
Address Hash Refcount Metric Path
0x5a5e46bc 2001 1 0 i
switch#
 

Related Commands

Command
Description
maximum-paths
Controls the maximum number of parallel routes that the Border Gateway Protocol (BGP) can support.
show ip bgp
Displays the BGP table information.
show ip bgp neighbors
Displays BGP neighbor information.