tacacs-server timeout

To specify the time between retransmissions to the TACACS+ servers, use the tacacs-server timeout command. To revert to the default, use the no form of this command.

tacacs-server timeout seconds

no tacacs-server timeout seconds

Syntax Description

seconds

Seconds between retransmissions to the TACACS+ server. The valid range is 1 to 60 seconds.


Command Default

1 second

Command Modes

Global configuration mode

Command History

Release
Modification

4.0(0)N1(1a)

This command was introduced.


Usage Guidelines

You must use the feature tacacs+ command before you configure TACACS+.

Examples

This example shows how to configure the TACACS+ server timeout value:

switch(config)# tacacs-server timeout 3 

This example shows how to revert to the default TACACS+ server timeout value:

switch(config)# no tacacs-server timeout 3 

Related Commands

Command
Description

feature tacacs+

Enables TACACS+.

show tacacs-server

Displays TACACS+ server information.