show startup-config pim

To display information about the startup-system configuration for IPv4 Protocol Independent Multicast (PIM), use the show startup-config pim command.

show startup-config pim [all]

Syntax Description

all

(Optional) Displays configured and default information.


Command Default

None

Command Modes

Any command mode

Command History

Release
Modification

5.0(3)N1(1)

This command was introduced.


Usage Guidelines

This command requires the LAN Base Services license.

Examples

This example shows how to display information about the startup-system configuration for IPv4 PIM:

switch(config)# show startup-config pim