show rlir

To display Registered Link Incident Report (RLIR) information, use the show rlir command.

show rlir {erl [vsan vsan-id] | history | recent {interface fc slot/port | portnumber port} | statistics [vsan vsan-id]}

Syntax Description

erl

Displays the Established Registration List.

vsan vsan-id

(Optional) Specifies a VSAN ID. The range is from 1 to 4093.

history

Displays the link incident history.

recent

Displays recent link incidents.

interface fc slot/port

Specifies a Fibre Channel interface.

portnumber port

Displays RLIR information for the specified port number.

statistics

Displays RLIR statistics for all VSANs or the specified VSAN.


Command Default

None

Command Modes

EXEC mode

Command History

Release
Modification

4.0(0)N1(1a)

This command was introduced.


Examples

This example shows how to display the RLIR information for VSAN 1:

switch# show rlir erl vsan 1 

This example shows how to display the RLIR statistics:

switch# show rlir statistics vsan 1