show provision

To display information about provision, use the show provision command.

show provision failed-config slot-number

Syntax Description

failed-config

Displays the configuration that failed to be applied to the slot.

slot-number

Slot number in the chassis. The range is from 2 to 199.


Command Default

None

Command Modes

EXEC mode

Configuration synchronization mode

Command History

Release
Modification

5.0(2)N1(1)

This command was introduced.


Examples

This example shows how to display the preprovisioning configuration that failed to be applied to slot 2:

switch# show provision failed-config 2 
Config has not been applied yet for this slot.

switch#

This example shows how to display the preprovisioning configuration that failed to be applied to slot 2 in a switch profile:

switch(config-sync)# show provision failed-config 2 
Config has not been applied yet for this slot.

switch(config-sync)#

Related Commands

Command
Description

provision

Preprovisions a module in a slot.

show running-config exclude-provision

Displays the running configuration excluding the preprovisioned features.

slot

Enables a slot for preprovisioning a module.