show policy-map system

To display all active policy maps in the system, use the show policy-map system command.

show policy-map system [type {network-qos | qos [input] | queuing [input | output]}]

Syntax Description

type

(Optional) Specifies the component type to display.

network-qos

Displays policy maps of type network-qos only.

qos

Displays policy maps of type qos only.

input

(Optional) Displays policy maps assigned to input traffic.

queuing

Displays policy maps of type queuing only.

output

(Optional) Displays policy maps assigned to output traffic.


Command Default

All policy maps

Command Modes

EXEC mode

Command History

Release
Modification

4.1(3)N1(1)

This command was introduced.


Usage Guidelines

If you do not specify a policy map type and name, the system displays all the active policy maps in the system.

Examples

This example shows how to display all active policy maps in the system:

switch# show policy-map system 

  Type network-qos policy-maps
  ===============================

  policy-map type network-qos s
    class type network-qos s2      match qos-group 3

      mtu 4000
    class type network-qos s1      match qos-group 2

      mtu 5000
      set cos 0
      multicast-optimize
      pause no-drop
    class type network-qos s3      match qos-group 4

      mtu 9216
    class type network-qos s4      match qos-group 5

      mtu 9216
    class type network-qos class-fcoe      match qos-group 1

      pause no-drop
      mtu 2158
    class type network-qos class-default      match qos-group 0

      mtu 1500

  Service-policy (qos) input:   s
    policy statistics status:   disabled

    Class-map (qos):   s1 (match-any)
      Match: cos 0
      set qos-group 2

    Class-map (qos):   class-1-2 (match-any)
      Match: cos 1-2
      set qos-group 3

    Class-map (qos):   class-4-5 (match-any)
      Match: cos 4-5
      set qos-group 4

    Class-map (qos):   class-6 (match-any)
      Match: cos 6
      set qos-group 5

    Class-map (qos):   class-fcoe (match-any)
      Match: cos 3
      set qos-group 1

    Class-map (qos):   class-default (match-any)
      Match: any
      set qos-group 0

  Service-policy (queuing) input:   pqe1
    policy statistics status:   disabled

    Class-map (queuing):   cqe1 (match-any)
      Match: qos-group 2
      bandwidth percent 20

    Class-map (queuing):   cqe2 (match-any)
      Match: qos-group 3
      priority

    Class-map (queuing):   cqe3 (match-any)
      Match: qos-group 4
      bandwidth percent 20

    Class-map (queuing):   cqe4 (match-any)
      Match: qos-group 5
      bandwidth percent 40

    Class-map (queuing):   class-fcoe (match-any)
      Match: qos-group 1
      bandwidth percent 10

    Class-map (queuing):   class-default (match-any)
      Match: qos-group 0
      bandwidth percent 5

  Service-policy (queuing) output:   pqe1
    policy statistics status:   disabled

    Class-map (queuing):   cqe1 (match-any)
      Match: qos-group 2
      bandwidth percent 20

    Class-map (queuing):   cqe2 (match-any)
      Match: qos-group 3
      priority

    Class-map (queuing):   cqe3 (match-any)
      Match: qos-group 4
      bandwidth percent 20

    Class-map (queuing):   cqe4 (match-any)
      Match: qos-group 5
      bandwidth percent 40

    Class-map (queuing):   class-fcoe (match-any)
      Match: qos-group 1
      bandwidth percent 10

    Class-map (queuing):   class-default (match-any)
      Match: qos-group 0
      bandwidth percent 5

switch#

This example shows how to display active network-qos policy maps in the system:

switch# show policy-map system type network-qos 

  Type network-qos policy-maps
  ===============================

  policy-map type network-qos s
    class type network-qos s2      match qos-group 3

      mtu 4000
    class type network-qos s1      match qos-group 2

      mtu 5000
      set cos 0
      multicast-optimize
      pause no-drop
    class type network-qos s3      match qos-group 4

      mtu 9216
    class type network-qos s4      match qos-group 5

      mtu 9216
    class type network-qos class-fcoe      match qos-group 1

      pause no-drop
      mtu 2158
    class type network-qos class-default      match qos-group 0

      mtu 1500
switch#

Related Commands

Command
Description

show policy-map

Displays all policy maps.