show ip ospf request-list

To display a list of all link-state advertisements (LSAs) requested by a router, use the show ip ospf request-list command.

show ip ospf request-list neighbor-id {ethernet slot/port | loopback if_number | port-channel number}

Syntax Description

neighbor-id

Router ID of the neighbor. Specify as an IP address.

ethernet slot/port

(Optional) Specifies the Ethernet interface and the slot number and port number. The slot number is from 1 to 255, and the port number is from 1 to 128.

loopback if_number

(Optional) Specifies the loopback interface. The loopback interface number is from 0 to 1023.

port-channel number

(Optional) Specifies the EtherChannel interface and EtherChannel number. The range is from 1 to 4096.


Command Default

None

Command Modes

Any command mode

Command History

Release
Modification

5.0(3)N1(1)

This command was introduced.


Usage Guidelines

Use the show ip ospf request-list command to troubleshoot Open Shortest Path First (OSPF) routing operations.

This command requires the LAN Base Services license.

Examples

This example shows how to display a list of all LSAs requested by a router:

switch# show ip ospf request-list 40.40.40 ethernet 2/1

Related Commands

Command
Description

show running-config ospf

Displays the OSPF running configuration.