show ip msdp peer

To display information about Multicast Source Discovery Protocol (MSDP) peers, use the show ip msdp peer command.

show ip msdp peer [peer-address] [vrf {vrf-name | all}]

Syntax Description

peer-address

(Optional) IP address of an MSDP peer.

vrf

(Optional) Applies to a virtual routing and forwarding (VRF) instance.

vrf-name

VRF name. The name can be a maximum of 32 alphanumeric characters and is case sensitive.

all

Specifies all VRFs.


Command Default

None

Command Modes

Any command mode

Command History

Release
Modification

5.0(3)N1(1)

This command was introduced.


Usage Guidelines

This command requires the LAN Base Services license.

Examples

This example shows how to display information about MSDP peers:

switch(config)# show ip msdp peer