show ip eigrp

To display a summary of the Enhanced Interior Gateway Routing Protocol (EIGRP) processes, use the show ip eigrp command.

show ip eigrp [instance-tag]

Syntax Description

instance-tag

(Optional) Name of the EIGRP instance. The instance-tag can be any case-sensitive, alphanumeric string up to 20 characters.


Command Default

None

Command Modes

Any command mode

Command History

Release
Modification

5.0(3)N1(1)

This command was introduced.


Usage Guidelines

This command requires the LAN Base Services license.

Examples

This example shows how to display all the EIGRP instances:

switch# show ip eigrp 
IP-EIGRP AS 65535 ID 3.1.1.1 VRF default
  Process-tag: Test1
  Status: running
  Authentication mode: none
  Authentication key-chain: none
  Metric weights: K1=1 K2=0 K3=1 K4=0 K5=0
  IP proto: 88 Multicast group: 224.0.0.10
  Int distance: 90 Ext distance: 170
  Max paths: 8
  Number of EIGRP interfaces: 8 (0 loopbacks)
  Number of EIGRP passive interfaces: 0
  Number of EIGRP peers: 8
  Redistributing:
    direct route-map SVI-EIGRP
  Graceful-Restart: Enabled
  Stub-Routing: Disabled
  NSF converge time limit/expiries: 120/0
  NSF route-hold time limit/expiries: 240/0
  NSF signal time limit/expiries: 20/0
  Redistributed max-prefix: Disabled
switch#

Related Commands

Command
Description

show running-config eigrp

Displays EIGRP running configuration information.

router eigrp

Configures an EIGRP instance.